R-TUBE 115/19W 230O830 GF / 0206573GF
Design: LED lamp RIDI-TUBE, colour rendering Ra >= 80, standard colour tolerance < 3 Step MacAdam (initial). LED module configured as a linear circuit board. Mid-power LEDs for even illumination and maximum efficiency. Base profile in extruded aluminium for optimum thermal management. Linear circuit board interlocked with the base profile along the whole length. Cover in clear, satinised or opal PMMA for efficient light emission, base in durable white PC. Operation using an external LED driver (prefitted in luminaire), constant current, safety extra low voltage less than 60 Volts (SELV conformity).
El. conv.: Electronic converter for LED, 230 Volt, 0/50-60 Hz and internal connector block. Suitable for direct voltage operation and use in central battery systems.
Dim. conv. DALI: Electronic DALI converter for LED, 230 Volt, 0/50-60 Hz and internal connector block. Suitable for direct voltage operation and use in central battery systems.
Lampholder system: Lamp base system RIDI-TUBE with electrical and mechanical interface, polarity reversal proof. Toolless lamp change twist-clip mechanism, corresponding to conventional fluorescent lamps. Mechanical and electrical fixture on the longitudinal sides inside the base. Automatic adjustment of the precise required electrical current with the newly developed lamp base.
Mounting: Pre-fitted mounting of electrical components in almost all luminaires from the RIDI range. Toolless on-site mounting of RIDI-TUBEs on site similar to fluorescent lamps.
Rated service life: Ambient temperature -20°C to +25°C LED components: L80B50 > 50,000 hours in luminaires with metal housing. LED components: L80B50 > 40,000 hours in closed luminaires made of plastic. L80B50 > 50,000 hours: Tc = 75°C L80B50 > 40,000 hours: Tc = 80°C
|Gross weight:||0,445 kg|
|Colour temperature:||3000 K|
|Lamp luminous flux:||2300 lm|
|Lamp output:||19 W|
|Energy consumption:||21 kWh/1000h|
|Energy efficiency class:||A+|
Light distribution curve