Logo RIDI Lighting A RIDI Group brand
EN 0

Search result list

Setting the learning agenda

Pick the perfect scene using Class Control's tailored control interface. Maximum energy savings and the optimum learning environment.

Daylight Harvesting

  • Lights DIM as daylight increases
  • Energy usage falls

When natural daylight reaches a point at which lighting levels can be reduced, Class Control’s daylight detection sensors allow for staged dimming of luminaires.

Interactive Mode

  • Lights near projector lowered
  • Remaining lights provide working level

The interactive whiteboard is a common feature in today’s classroom but the learning experience only reaches its full potential when lighting levels are able to adjust to the teaching situation, minimising glare and reflection.

Low Natural Light

  • Levels maintained as daylight fades
  • Light level can be adjusted at any time

Just as the daylight saving mode reduces lighting intensity, Class Control’s daylight sensors automatically increase output from the luminaires when levels of natural light fall.

Absence Detection

  • Lights only on when required
  • Automatic Switch off

The lights are only lit when one of the lighting modes is chosen on the wall plate, they don't come on just because you've walked into the room.  Of course when the room's empty they switch of automatically if you forget to do it on your way out.

Ease of use...

Classrooms are multi-functional, having to cater for a wide range of tasks from close concentration deskwork to whiteboard viewing and multimedia presentation.

As the activity changes, the user is able to alter the light setting at the touch of a button. As well as the instant response delivered by the daylight sensors, users can select pre-set scenes, created for a variety of teaching needs, via wall mounted touch panels or handheld remote control.

... and Simple Installation

Class Control is based on addressable luminaires, sensors and switches. For this reason, wiring is extremely straightforward, with just a mains supply to each luminaire and a two core bus cable servicing each device.

Where conditions permit, sensors can be mounted as an integral part of the luminaire*. As a result, with installations using surface mounted or suspended luminaires, no control boxes are needed.

For applications requiring recessed fittings, RIDI’s connection modules make installation even easier. All luminaires and sensors are pre-wired, with mains fed via a multi-point Luminaire Control Module (LCM). To connect to the control interfaces, only a two core cable is required to link switching components and additional LCMs.

Design

We work with you from the very begining to ensure that when all luminaires and controls are supplied they will be compatible, efficient and economical.

Please contact us if you would like further information about lighting controls, energy savings or if you would like any assistance with planning your next project

Commissioning

The Class Control system is setup by our in-house commissioning engineers.  They ensure that light levels, timer values and scene settings match your requirements and achieve energy savings to their full potential.

Support

A snapshot of every system we commission is stored on our servers in the UK.  That means that if you need a replacement part, we can ensure it is pre-programmed to match the original before it's sent out.

Downloads

pdf

Class Control Brochure

pdf

Classroom User Instruction

pdf

Typical Wiring Schematic

pdf

Installation guide with LCMs

Component Data Sheets

pdf

Wall plate

pdf

Surface / Recessed Multisensor

pdf

Integral Multisensor

pdf

Mini Switch Input Unit

pdf

DALI Power Supply

pdf

Luminaire Connection Module

This object is already on the Wish list