Logo RIDI Lighting A RIDI Group brand
EN 0

Search result list

VLG-F ...-5 (T26)

Product description

Design: LED gear tray made of sectional extruded aluminium, powder coated white (…WS-…), silver (…SI-…) or black (...SW-...). RIDI LED linear modules fitted with mid-power LEDs for outstanding efficiency. Operating in conformity with SELV, the boards are pressed over their entire surface onto the aluminium base profile for optimum heat dissipation. Soldered joints of the LED modules are tested for cavities and resistance to vibration and torsion in compliance with the most stringent quality standards. No thermal coupling between the LED modules and converters. Linear optics with wide beam light distribution made of clear, UV-stabilised PMMA integrated flush in the gear tray. End caps made of thermoplastic for conformity with IP54 protection rating. The width of the gear tray is identical to the trunking. Spring steel clips for fixture of the gear tray in the trunking VLT. In conjunction with trunking VLT for the configuration of modular variable continuous lighting systems conforms to protection rating IP20 and IP54. The gear trays can be mounted at any preferred location on the trunking. Electrical adapters for flexible take-off of the through wiring in the trunking with automatic PE conductor connection. Phase selection by means of sliding contact. Colour and optical coding for simple installation. Mechanical coding to prevent incorrect installation (polarity reversal). Where gear trays are variably positioned and where the electrical components come into contact with the trunking connector, mounting is only possible using trunking connector VLTV …-600.

Colour rendering in index Ra >= 80, colour temperature 4000 Kelvin (840), other colour temperatures possible on request.

LED gear tray with blue colour coding for mounting in VLT-5, VLT-7 or VLT-11. Lengths equivalent to T26.

El. conv.: Electronic converter for LED, 230 Volt, 0/50-60 Hz, wired to electrical adapter with phase selection by means of sliding contact. Suitable for direct voltage operation and use in central battery systems.

"ENEC+" notice: With the ENEC+ certification of this luminaire an independant institute confirms the reliability of our product data based on IEC standards. This includes, inter alia, luminaire luminous flux, luminaire output and colour temperature.

Note on “Food Hygiene Act”: These luminaires comply with the stipulations of the Food Hygiene Act as defined by Regulation (EC) No. 852/2004 (HACCP) Annex II Chapter I section 2 a, b, Chapter II section 1c relating to luminaires. These are suitable for use in the food industry.

VLG-F136-5NDSI-345B840 (silver)

Number of lamps: 1

Lamps: LED-M

Wattage: 22

Item number: 1522000SI

VLG-F136-5NDWS-345B840

Number of lamps: 1

Lamps: LED-M

Wattage: 22

Item number: 1522000

VLG-F158-5NDSI-521B840 (silver)

Number of lamps: 1

Lamps: LED-M

Wattage: 30

Item number: 1522005SI

VLG-F158-5NDWS-521B840

Number of lamps: 1

Lamps: LED-M

Wattage: 30

Item number: 1522005

VLG-F236-5NDSI-690B840 (silver)

Number of lamps: 2

Lamps: LED-M

Wattage: 22

Item number: 1522010SI

VLG-F236-5NDWS-690B840

Number of lamps: 2

Lamps: LED-M

Wattage: 22

Item number: 1522010

VLG-F258-5NDSI-1042B840 (silver)

Number of lamps: 2

Lamps: LED-M

Wattage: 30

Item number: 1522015SI

VLG-F258-5NDWS-1042B840

Number of lamps: 2

Lamps: LED-M

Wattage: 30

Item number: 1522015

This object is already on the Wish list